ISL59450 Datasheet, PDF (2/37 Pages) Intersil Corporation – Multiformat Video Crosspoint with Integrated Sync Separator

ISL59450
Absolute Maximum Ratings
Voltage on V_A
(referenced to GND = GND_A = GND_D) . . . . . . . . . . . . . . . . . 6.0V
Voltage on V_D
(referenced to GND = GND_A = GND_D) . . . . . . . . . . . . . . . . . 4.0V
Voltage on any Analog Input Pin . . . . . . . . . . . . . -0.3V to V_A + 0.3V
Voltage on any Digital Input Pin . . . . . . . . . . . . . . -0.3V to V_D + 0.3V
Current into any Output Pin . . . . . . . . . . . . . . . . . . . . . . . . . . ±20mA
ESD Classification
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000V
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125V
Thermal Information
Thermal Resistance
θ_JA (°C/W)
MQFP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.84
Maximum Biased Junction Temperature . . . . . . . . . . . . . . . . +150°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Pb-free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Temperature (Commercial) . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . V_A = 5.0V, V_D = 3.3V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: T_J = T_C = T_A
AC Electrical Specifications
V_A = 5.0V, V_D = 3.3V, V_IN = 0.7V_P-P, T_A = +25°C, R_L = 150Ω, V_TIPINx = 0.5V, VSLICE_INx = 0.6V,
V_LUMAx1_INx = V_LUMAx2_INx = 0.8; V_CHROMAx1_INx = V_CHROMAx2_INx = 1.15V, all frequency response
measurements relative to f = 100kHz, unless otherwise specified.
PARAMETER
DESCRIPTION
CONDITIONS
MIN TYP MAX UNIT
YPbPr/RGB (Component) Video Inputs
YPbPr-10MHz Passband Flatness, 10MHz Filter
f = 6MHz, GAIN 1
-1.6
-1.1
-0.4
dB
f = 6MHz, GAIN 2
-1.6
-1.1
-0.4
dB
Cutoff Flatness, 10MHz Filter
f = 10MHz, GAIN 1
-4.2
-2.7
-1.5
dB
f = 10MHz, GAIN 2
-4.2
-2.7
-1.5
dB
Stopband Rejection, 10MHz Filter
f = 27MHz, GAIN 1
-30
-19
-11
dB
f = 27MHz, GAIN 2
-30
-19
-11
dB
f = 54MHz, GAIN 1
-51
dB
f = 54MHZ, GAIN 2
-51
dB
YPbPr-20MHz Passband Flatness, 20MHz Filter
f =12MHz, GAIN 1
-1.5
-0.9
-0.4
dB
f =12MHz, GAIN 2
-1.5
-0.9
-0.4
dB
Cutoff Bandwidth, 20MHz Filter
f = 20MHz, GAIN 1
-3.6
-2.3
-1.3
dB
f = 20MHz, GAIN 2
-3.6
-2.3
-1.3
dB
Stopband Rejection, 20MHz Filter
f = 54MHz, GAIN 1
-30
-15
-9
dB
f = 54MHz, GAIN 2
-30
-15
-9
dB
YPbPr-36MHz Passband Flatness, 36MHz Filter
f = 20MHz, GAIN 1
-1.6
-1
-0.4
dB
f = 20MHz, GAIN 2
-1.6
-1
-0.4
dB
Cutoff Bandwidth, 36MHz Filter
f = 36MHz, GAIN 1
-4.7
-2.7
-1.5
dB
f = 36MHz, GAIN 2
-4.7
-2.7
-1.5
dB
Stopband Rejection, 36MHz Filter
f = 108MHz, GAIN 1
-22
dB
f = 108MHz, GAIN 2
-22
dB
2
FN7510.0
February 14, 2008