82C37A_06 Datasheet, PDF (24/24 Pages) Intersil Corporation – CMOS High Performance Programmable DMA Controller

Die Characteristics
DIE DIMENSIONS:
148 x 159 x 19 ±1mils
(3760- x 4040 x 525µm)
METALLIZATION:
Type: SiAlCu
Thickness: Metal 1: 8kÅ ± 0.75kÅ
Thickness: Metal 2: 12kÅ ± 1.0kÅ
Metallization Mask Layout
82C37A
GLASSIVATION:
Type: Nitrox
Thickness: 10kÅ ± 3kÅ
WORST CASE CURRENT DENSITY:
0.6 x 10⁵ A/cm²
82C37A
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
24
FN2967.2
March 20, 2006