|
X9119 Datasheet, PDF (2/18 Pages) Xilinx, Inc – Single Digitally-Controlled (XDCP ™ ) Potentiometer | |||
|
◁ |
X9119
Ordering Information
PART NUMBER
X9119TV14I
POTENTIOMETER
PART MARKING VCC LIMITS (V) ORGANIZATION (kâ¦) TEMP RANGE (°C)
PACKAGE
X9119TV I
5 ±10%
10
-40 to 85
14 Ld TSSOP (4.4mm)
X9119TV14
X9119TV
0 to 70
14 Ld TSSOP (4.4mm)
X9119TV14-2.7*
X9119TV F
-2.7 to 5.5
0 to 70
14 Ld TSSOP (4.4mm)
X9119TV14I-2.7
X9119TV G
-40 to 85
14 Ld TSSOP (4.4mm)
X9119TV14IZ-2.7* (Note)
-40 to 85
14 Ld TSSOP (4.4mm) (Pb-free)
*Add "T1" suffix for tape and reel.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
DETAILED FUNCTIONAL DIAGRAM
VCC
SCL
SDA
A2
A1
A0
WP
Interface
and
Control
Circuitry
Data
Control
Power On
Recall
DR0 DR1
DR2 DR3
Wiper
Counter
Register
(WCR)
RH
100Kâ¦
1024-taps
RL
RW
VSS
CIRCUIT LEVEL APPLICATIONS
⢠Vary the gain of a voltage amplifier
⢠Provide programmable dc reference voltages for
comparators and detectors
⢠Control the volume in audio circuits
⢠Trim out the offset voltage error in a voltage
amplifier circuit
⢠Set the output voltage of a voltage regulator
⢠Trim the resistance in Wheatstone bridge circuits
⢠Control the gain, characteristic frequency and
Q-factor in filter circuits
⢠Set the scale factor and zero point in sensor signal
conditioning circuits
⢠Vary the frequency and duty cycle of timer ICs
⢠Vary the dc biasing of a pin diode attenuator in RF
circuits
⢠Provide a control variable (I, V, or R) in feedback
circuits
2
SYSTEM LEVEL APPLICATIONS
⢠Adjust the contrast in LCD displays
⢠Control the power level of LED transmitters in
communication systems
⢠Set and regulate the DC biasing point in an RF
power amplifier in wireless systems
⢠Control the gain in audio and home entertainment
systems
⢠Provide the variable DC bias for tuners in RF
wireless systems
⢠Set the operating points in temperature control
systems
⢠Control the operating point for sensors in industrial
systems
⢠Trim offset and gain errors in artificial intelligent
systems
FN8162.2
September 15, 2005
|
▷ |