ISL70517SEH Datasheet, PDF (10/27 Pages) Intersil Corporation – Precision test and measurement

ISL70517SEH
Typical Post Radiation Performance Curves V_CC = V_CO = 18V, V_EE = V_EO = -18V, V_CM = 0V, R_L = Open,
unless otherwise specified. Error bars (if shown) are based on minimum and maximum data. (Continued)
8000
6000
±18V SUPPLIES
4000
2000
0
-2000
-4000
-6000
V_OSFB 18V, BIASED
V_OSFB 18V, GROUNDED
SPEC LIMIT
SPEC LIMIT
-8000
0
25
50
75 ANNEAL
TOTAL DOSE, krad(Si) AT 0.01rad(Si)/s
FIGURE 9. V_OSFB vs TOTAL DOSE
250
200
150
100
50
0
-50
-100
-150
-200
±18V SUPPLIES
I_BV_FB, 18V, BIASED
I_BV_FB, 18V, GROUNDED
SPEC LIMIT
SPEC LIMIT
-250
0
25
50
75 ANNEAL
TOTAL DOSE, krad(Si) AT 0.01rad(Si)/s
FIGURE 10. I_BV_FB vs TOTAL DOSE
0.025
0.02
0.015 ^{±18V SUPPLIES}
0.01
0.005
0
-0.005
-0.01
-0.015
-0.02
-0.025
0
25
50
E_G120k, 18V, BIASED
E_G120k, 18V, GROUNDED
SPEC LIMIT
SPEC LIMIT
75 ANNEAL
TOTAL DOSE, krad(Si) AT 0.01rad(Si)/s
FIGURE 11. GAIN ERROR (GAIN = 1) vs TOTAL DOSE
0.05
0.04 _{±18V SUPPLIES}
0.03
0.02
0.01
0
-0.01
-0.02
-0.03
-0.04
-0.05
0
25
50
E_G100, 18V, BIASED
E_G 100, 18V, GROUNDED
SPEC LIMIT
SPEC LIMIT
75 ANNEAL
TOTAL DOSE, krad(Si) AT 0.01rad(Si)/s
FIGURE 12. GAIN ERROR (GAIN = 100) vs TOTAL DOSE
0.05
0.04
±18V SUPPLIES
0.03
0.02
0.01
0
-0.01
-0.02
-0.03
-0.04
-0.05
0
25
50
Eg 30k, 18V, BIASED
Eg 30k, 18V, GROUNDED
SPEC LIMIT
SPEC LIMIT
75 ANNEAL
TOTAL DOSE, krad(Si) AT 0.01rad(Si)/s
FIGURE 13. GAIN ERROR (GAIN = 1) vs TOTAL DOSE
15
RFB = 30.1k
10
5
0
-5
V_OSOUT 30k, BIASED
V_OSOUT 30k, GROUNDED
-10
SPEC LIMIT
SPEC LIMIT
-15
0
25
50
75
ANNEAL
TOTAL DOSE, krad(Si) AT 0.01rad(Si)/s
FIGURE 14. V_osOUT (GAIN = 1) vs TOTAL DOSE
Submit Document Feedback ₁₀
FN8699.4
December 15, 2016