80960KA Datasheet, PDF (22/43 Pages) Intel Corporation – EMBEDDED 32-BIT MICROPROCESSOR

80960KA
Table 8. 80960KA AC Characteristics (25 MHz)
Symbol
Parameter
Min Max Units
Notes
Input Clock
T₁
Processor Clock Period (CLK2)
20
125
ns V_IN = 1.5V
T₂
Processor Clock Low Time (CLK2) 5
ns V_IL = 10% Point = 1.2V
T₃
Processor Clock High Time
5
(CLK2)
ns V_IH = 90% Point = 0.1V + 0.5 V_CC
T₄
Processor Clock Fall Time (CLK2)
10
ns V_IN = 90% Point to 10% Point (1)
T₅
Processor Clock Rise Time (CLK2)
Synchronous Outputs
10
ns V_IN = 10% Point to 90% Point (1)
T₆
Output Valid Delay
T_6H
HLDA Output Valid Delay
T₇
ALE Width
T₈
ALE Output Valid Delay
T₉
Output Float Delay
T_9H
HLDA Output Float Delay
Synchronous Inputs
2
18
ns
4
23
ns
12
ns
2
18
ns
2
18
ns (2)
4
20
ns (2)
T₁₀
Input Setup 1
3
ns (3)
T₁₁
Input Hold
5
ns (3)
T_11H
HOLD Input Hold
4
ns
T₁₂
Input Setup 2
7
ns
T₁₃
Setup to ALE Inactive
8
ns
T₁₄
Hold after ALE Inactive
8
ns
T₁₅
Reset Hold
3
ns
T₁₆
Reset Setup
5
ns
T₁₇
Reset Width
820
ns 41 CLK2 Periods Minimum
NOTES:
1. Clock rise and fall times are not tested.
2. A float condition occurs when the maximum output current becomes less than I_LO. Float delay is not tested; however, it should not be longer than
the valid delay.
3. LAD31:0, BADAC, HOLD, LOCK and READY are synchronous inputs. IAC/INT₀, INT₁, INT₂/INT_R and INT₃ may be synchronous or asynchronous.
19