|
82562G Datasheet, PDF (1/44 Pages) Intel Corporation – Mbps Platform LAN Connect | |||
|
82562G 10/100 Mbps Platform LAN
Connect (PLC)
Networking Silicon
Datasheet
Product Features
â IEEE 802.3 10BASE-T/100BASE-TX
compliant physical layer interface
â IEEE 802.3u Auto-Negotiation support
â Digital Adaptive Equalization control
â Link status interrupt capability
â XOR tree mode support
â 3-port LED support (speed, link and
activity)
â 10BASE-T auto-polarity correction
â LAN Connect Interface
â Diagnostic loopback mode
â 1:1 transmit transformer ratio support
â Low power (less than 300 mW in active
transmit mode)
â Reduced power in âunplugged modeâ (less
than 50 mW)
â Automatic detection of âunplugged modeâ
â 3.3 V device
â Lead-free1 48-pin Shrink Small Outline
Package for both leaded and lead-free
designs. (Devices that are lead-free are
marked with a circled âe3â and have the
product code prefix: LUxxxxxx).
1 This device is lead-free. That is, lead has not been intentionally added, but lead may still exist
as an impurity at <1000 ppm. The Material Declaration Data Sheet, which includes lead
impurity levels and the concentration of other Restriction on Hazardous Substances (RoHS)-
banned materials, is available at:
ftp://download.intel.com/design/packtech/material_content_IC_Package.pdf#pagemode=bookmarks
In addition, this device has been tested and conforms to the same parametric specifications as
previous versions of the device.
For more information regarding lead-free products from Intel Corporation, contact your Intel
Field Sales representative.
Additional Features
â The 82562G PLC supports drop-in replacement with the 82562ET. If it is not used as a drop-
in replacement, strapping options enable new operating modes:
â LED support for three logic configurations.
â LAN disable function using one pin.
â Increased transmit strength.
â The receive BER performance increases the margin for cable length.
â Return Loss performance is improved.
Revision 1.3
April 2005
|
▷ |