XC228X_08 Datasheet, PDF (87/125 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance

XC2287 / XC2286 / XC2285
XC2000 Family Derivatives
Electrical Parameters
Table 16
Switching Power Consumption XC228x
(Operating Conditions apply)
Parameter
Sym-
Values
bol _{Min. Typ. Max.}
Unit Note /
Test Condition
Power supply current
I_SACT –
(active) with all peripherals
active and EVVRs on
10 +
10 +
mA Active mode¹⁾²⁾
0.6×f_SYS 1.0×f_SYS
f_SYS in [MHz]
Power supply current
I_SSO –
1.0
2.0
mA Stopover Mode²⁾
in stopover mode,
EVVRs on
Power supply current
in standby mode
I_SSB –
150
250
µA Standby mode,
upper voltage area
Power supply current
in standby mode
I_SSB –
70
150
µA Standby mode,
lower voltage area
1) The pad supply voltage pins (V_DDPB) provide the input current for the on-chip EVVRs and the current consumed
by the pin output drivers. A small current is consumed because the drivers’ input stages are switched.
2) The pad supply voltage has only a minor influence on this parameter.
Data Sheet
85
V2.1, 2008-08