XC228X_08 Datasheet, PDF (76/125 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance

XC2287 / XC2286 / XC2285
XC2000 Family Derivatives
Electrical Parameters
4
Electrical Parameters
The operating range for the XC228x is defined by its electrical parameters. For proper
operation the specified limits must be respected during system design.
Note: Typical parameter values refer to room temperature and nominal supply voltage,
minimum/maximum parameter values also include conditions of
minimum/maximum temperature and minimum/maximum supply voltage.
Additional details are described where applicable.
4.1
General Parameters
These parameters are valid for all subsequent descriptions, unless otherwise noted.
Table 11 Absolute Maximum Rating Parameters
Parameter
Symbol
Values
Min. Typ. Max.
Storage temperature
T_ST
-65 –
Junction temperature
T_J
-40 –
Voltage on V_DDI pins with V_DDIM, -0.5 –
respect to ground (V_SS) V_DDI1
Voltage on V_DDP pins with V_DDPA, -0.5 –
respect to ground (V_SS) V_DDPB
Voltage on any pin with V_IN
respect to ground (V_SS)
-0.5 –
Input current on any pin –
-10 –
during overload condition
150
150
1.65
6.0
V_DDP
+ 0.5
10
Absolute sum of all input –
currents during overload
condition
–
–
|100|
Output current on any pin I_OH, I_OL –
–
|30|
Unit Note /
Test Condition
°C –
°C under bias
V–
V–
V
V_IN < V_DDPmax
mA –
mA –
mA –
Note: Stresses above the values listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only. Functional operation
of the device at these or any other conditions above those indicated in the
operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for an extended time may affect device reliability.
During absolute maximum rating overload conditions (V_IN > V_DDP or V_IN < V_SS) the
voltage on V_DDP pins with respect to ground (V_SS) must not exceed the values
defined by the absolute maximum ratings.
Data Sheet
74
V2.1, 2008-08