TLE4926C-HTNE6747 Datasheet, PDF (8/27 Pages) Infineon Technologies AG – Dynamic Differential Hall Effect Sensor

1.1 Absolute Maximum Ratings
TLE4926C-HTN E6747
No.
Parameter
Symbol ^{min typ max Unit}
Remarks
1.1.1
Supply voltage
V_S
-18
-24
-26
-28
18
V-
24
V 1h with R_Series ≥ 200Ω²
26
V _{5min with RSeries ≥ 200Ω}¹
28
V _{1min with RSeries ≥ 200Ω}¹
1.1.2
Supply current
I_S
-10
25 mA -
1.1.3 Output OFF voltage V_Q
-0.3
-18
-18
-1.0
18
V-
24
V 1h with R_Load ≥ 500Ω
26
V _{5min with RLoad ≥ 500Ω}
-
V _{1h (protected by internal}
series resistor)
1.1.4 Output ON voltage
V_Q
-
16
V Current internal limited by
Short circuit protection
(72h @ T_A < 40°C).
-
18
V Current internal limited by
short circuit protection
(1h @ T_A < 40°C).
-
24
V _{Current internal limited by}
short circuit protection
(1min @ T_A < 40°C).
1.1.5 Continuous output
I_Q
-50
current
50 mA -
1.1.6 Junction temperature T_j
-40
°C -
155 °C 5000 h (not additive)
165 °C 2500 h (not additive)
175 °C 500 h (not additive)
195 °C 10x1 h (additive to the
other life times).
1.1.7 Storage temperature T_S
-40
150 °C -
1.1.8
Thermal resistance
junction-air
R_{th JA}
190 K/W Lower values are possible
with overmolded device.
Note: Stresses above those listed here may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
2 _{Accumulated life time}
Data Sheet
Page 8 of 27