TLE7269G Datasheet, PDF (6/34 Pages) Infineon Technologies AG – Twin LIN Transceiver

TLE7269G
Pin Configuration
Table 1
Pin No.
8
9
10
11
12
13
14
Pin Definitions and Functions (cont’d)
Symbol
Function
INH2
Inhibit output 2;
battery supply related output
HIGH (V_S) in Normal and Stand-By operation mode
can be used to control an external voltage regulator
can be used to control external bus termination resistor when the device will be used
as Master node
W2O
Wake BUS 2 OFF;
switch off Wake-Up feature on BUS 2; active HIGH,
integrated pull-down
BUS 2
Bus 2 input / output;
LIN bus line input/output
LOW in dominant state
Internal termination and pull-up current source
GND
Ground
BUS 1
Bus 1 input / output;
LIN bus line input/output
LOW in dominant state
Internal termination and pull-up current source
V_S
INH1
Battery supply input
Inhibit output 1;
battery supply related output
HIGH (V_S) in Normal and Stand-By operation mode
can be used to control an external voltage regulator
can be used to control external bus termination resistor when the device will be used
as Master node
Data Sheet
6
Rev. 1.2, 2007-11-13