TLE7269G Datasheet, PDF (21/34 Pages) Infineon Technologies AG – Twin LIN Transceiver

TLE7269G
6
Electrical Characteristics
6.1
Functional Device Characteristics
Electrical Characteristics
Table 7 Electrical Characteristics
7.0 V < V_S < 27 V; R_L = 500 Ω; V_io = 5V; -40 °C < T_j < 125 °C; all voltages with respect to ground; positive current
flowing into pin; unless otherwise specified.
Pos. Parameter
Symbol Limit Values
Unit Remarks
Min. Typ. Max.
Current Consumption
6.1.1 Current consumption at
I_S,rec
0.5
V_S(both channels recessive)
6.1.2 Current consumption normal I_VIO,norm –
mode at V_io
6.1.3 Current consumption
at V_S (both channels
dominant)
I_S,dom
–
6.1.4
6.1.5
Current consumption
in sleep mode at V_io
Current consumption
in sleep mode
I_VIO,Sleep
–
I_S,Sleep
–
6.1.6 Current consumption in sleep I_S,Sleep,typ –
mode
Under Voltage Detection
1.6 3.0
10
50
3
5.0
1
10
7
12
5
10
mA recessive state, without R_L;
V_S = 13.5 V
V_TxD = V_io
µA Normal Operation mode.
V_IO=5 V
mA dominant state, without R_L;
V_S = 13.5 V;
V_TxD = 0 V
µA Sleep mode, V_IO=5 V
µA Sleep mode,
V_S = 18 V;
V_BUS= V_WK = V_S;
µA Sleep mode, T_j < 85 °C;
V_S = 13.5 V;
V_WK= V_S= V_BUS;
6.1.7 Blocking under voltage
detection at V_S
(V_S on the falling edge)
V_s,UV,BLK 3.5
6.1.8 Power ON under voltage
detection at V_S
V_s,UV,PON –
6.1.9 Under voltage detection at V_IO V_IO,UV
1.5
6.1.10 Under voltage blanking time t_blankUV
–
Receiver Outputs: RxD1, RxD2
–
5
–
3.5
2.5 3
5
–
V Communication blocked
no reset (see Figure 11)
V Device reset to Stand-By-
Mode ¹⁾(see Figure 11)
V Communication blocked
no reset (see Figure 11)
µs ¹⁾
6.1.11 HIGH level output current
6.1.12 LOW level output current
I_RD,H
I_RD,L
–10 -4
-2
2
4
10
mA V_RD = 0.8 × V_IO
mA V_RD = 0.2 × V_IO
Data Sheet
21
Rev. 1.2, 2007-11-13