TLE7269G Datasheet, PDF (19/34 Pages) Infineon Technologies AG – Twin LIN Transceiver

TLE7269G
General Product Characteristics
5
General Product Characteristics
5.1
Absolute Maximum Ratings
Table 4 Absolute Maximum Ratings¹⁾
All voltages with respect to ground; positive current flowing into pin;
(unless otherwise specified)
Pos. Parameter
Symbol Limit Values
Min.
Max.
Voltages
5.1.1 Battery supply voltage
V_S
-0.3
40
5.1.2 Logic supply voltage
V_IO
-0.3
5.5
5.1.3 Bus and WK input voltage
versus GND
versus V_S
V_BUS,G
-40
40
V_BUS,Vs
-40
40
5.1.4 Logic voltages at EN, W2O, V_logic
-0.3
5.5
TxD1, TxD2, RxD1, RxD2
5.1.5 INH1, INH2 voltage
versus GND
versus V_S
V_INH,G
-0.3
40
V_INH,Vs
-40
0.3
Currents
5.1.6 Output current at INH1,
I_INH
INH2
-150
80
Temperatures
5.1.7 Junction temperature
T_j
5.1.8 Storage temperature
T_s
ESD Resistivity
-40
150
-55
150
5.1.9 Electrostatic discharge
V_ESD
-6
6
voltage at V_S, BUS1, BUS2,
WK versus GND
5.1.10 Electrostatic discharge
V_ESD
-1
1
voltage W2O versus V_S
5.1.11 Electrostatic discharge
V_ESD
-2
2
voltage all pins except W2O
versus V_S
1) Not subject to production test, specified by design
2) Output current is internally limited to -150 mA
3) ESD susceptibility HBM according to EIA / JESD 22-A 114
Unit Remarks
V
LIN Spec 2.1 Param. 10
V
–
–
V
V
V
–
–
V
V
mA
2)
°C
–
°C
–
kV
Human Body Model
(100pF via 1.5 kΩ)³⁾
kV
Human Body Model
(100pF via 1.5 kΩ)³⁾
kV
Human Body Model
(100pF via 1.5 kΩ)³⁾
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
19
Rev. 1.2, 2007-11-13