TLE6263 Datasheet, PDF (31/40 Pages) Infineon Technologies AG – LS CAN, LDO and HS Switch

Final Datasheet TLE 6263
7.3 Electrical Characteristics (cont’d)
V_S = 13.5 V; I_CC = 1 mA; normal mode; all outputs open; – 40 °C < T_j < 150 °C (max. 125°C for CAN circuit
characteristics); all voltages with respect to ground; positive current defined flowing into pin; unless otherwise
specified.
Parameter
Symbol Limit Values Unit Test Condition
min. typ. max.
Data Output Timing
Not subject to production test - specified by design
DO rise time
DO fall time
DO enable time
DO disable time
DO valid time
t_rDO
–
t_fDO
–
t_ENDO
–
t_DISDO
–
t_VADO
–
50 100 ns
50 100 ns
– 250 ns
– 250 ns
100 250 ns
C_L = 100 pF
C_L = 100 pF
low impedance
high impedance
V_DO < 0.1 V_CC;
V_DO > 0.9 V_CC;
C_L = 100 pF
Thermal Prewarning and Shutdown (junction temperatures)
Not subject to production test - specified by design
OUTHS thermal prewarning T_jPW
ON temperature
120 145 170 °C
OUTHS thermal prewarning ∆T
hyst.
– 30 – K
OUTHS thermal shutdown T_jSD
temp.
150 175 200 °C
OUTHS thermal switch-on T_jSO
temp.
120 – 170 °C
OUTHS thermal shutdown ∆T
hyst.
– 30 – K
OUTHS ratio of SD to PW
temp.
T_jSD / T_jPW
1.20 –
–
Vcc thermal shutdown temp. T_jSD
155 185 200 °C
OUTHS thermal shutdown T_jSD
temp.
150
°C
bit 0 of SPI
diagnosis word
–
–
–
–
–
hysteresis 15°K
(typ.)
hysteresis 15°K
(typ.)
Version 2.08
31
2004-06-07