TLE6263 Datasheet, PDF (27/40 Pages) Infineon Technologies AG – LS CAN, LDO and HS Switch

Final Datasheet TLE 6263
7.3 Electrical Characteristics (cont’d)
V_S = 13.5 V; I_CC = 1 mA; normal mode; all outputs open; – 40 °C < T_j < 150 °C (max. 125°C for CAN circuit
characteristics); all voltages with respect to ground; positive current defined flowing into pin; unless otherwise
specified.
Parameter
Symbol Limit Values Unit Test Condition
min. typ. max.
Termination Outputs RTL, RTH
RTL to V_CC switch-on
resistance
RTL to BAT switch series
resistance
RTH to ground switch-on
resistance
RTH output voltage
R_RTL
R_oRTL
R_RTH
V_oRTH
RTH pull-down current
RTL pull-up current
I_RTHpd
I_RTLpu
RTH leakage current
I_RTHl
RTL leakage current
I_RTLl
40
5
15
40
0.7
40 75
-120 -75
-5
-5
95 Ω
30 kΩ
95 Ω
1.0 V
120 µA
-40 µA
5
µA
5
µA
I_o = – 10 mA;
V_BAT-stand-by or
sleep mode
I_o = 10 mA;
I_o = 1 mA; sleep mode
or V_BAT-stand-by
failure cases 6 and 6a
failure cases 3, 3a, 5
and 7
V_CC = 0 V, V_S = 0 V,
V_RTH = 5 V, T_j < 85 °C
V_CC = 0 V, V_S = 0 V
V_RTL = 13.5 V,
T_j < 85 °C
CAN-Transceiver
Dynamic Characteristics
CANH and CANL bus output t_rd
transition time recessive-to-
dominant
0.6 1.2 2.1 µs ^{10% to 90%;}
C₁ = 10 nF;
C₂ = 0; R₁ = 100 Ω
CANH and CANL bus output t_dr
transition time dominant-to-
recessive
0.3 0.6 1.3 µs ^{10% to 90%;}
C₁ = 1 nF; C₂ = 0; R₁ =
100 Ω
Minimum dominant time for t_wu(min) 12 20 32 µs ^{Stand-by modes}
wake-up on CANL or CANH
Version 2.08
27
2004-06-07