TLE6263 Datasheet, PDF (28/40 Pages) Infineon Technologies AG – LS CAN, LDO and HS Switch

Final Datasheet TLE 6263
7.3 Electrical Characteristics (cont’d)
V_S = 13.5 V; I_CC = 1 mA; normal mode; all outputs open; – 40 °C < T_j < 150 °C (max. 125°C for CAN circuit
characteristics); all voltages with respect to ground; positive current defined flowing into pin; unless otherwise
specified.
Parameter
Symbol Limit Values Unit Test Condition
min. typ. max.
Failure cases 3 and 6
detection time
t_fail
25 45 80 µs
Failure case 6a detection
time
2.0 4.8 8.0 ms
Failure cases 5 and 7
detection time
1.0 2.0 4.0 ms
Failure cases 5, 6, 6a and 7
recovery time
25 45 80 ms
Failure cases 3 recovery time
250 500 750 µs
Failure cases 5 and 7
detection time
t_fail
0.4 1.0 2.4 ms ^{Stand-by modes}
Failure cases 6 and 6a
detection time
0.8 4.0 8.0 ms ^{Stand-by modes}
Failure cases 5, 6, 6a and 7
recovery time
0.4 1.0 2.4 ms ^{Stand-by modes}
Propagation delay
t_PD(L) –
TxD-to-RxD LOW (recessive
to dominant)
1.5 2.1 µs ^C1 ^{= 100 pF;}
C₂ = 0; R₁ = 100 Ω; no
failures and bus failure
cases 1, 2, 3a and 4
–
1.7 2.4 µs ^C1 ^{= C}2 ^{= 3.3 nF;}
R₁ = 100 Ω; no bus
failure and failure
cases 1, 2, 3a and 4
–
1.8 2.5 µs ^C1 ^{100 pF; C}2 ^{= 0;}
R₁ = 100 Ω; bus failure
cases 3, 5, 6, 6a and 7
–
2.0 2.6 µs ^C1 ^{= C}2 ^{= 3.3 nF;}
R₁ =100 Ω; bus failure
cases 3, 5, 6, 6a and 7
Version 2.08
28
2004-06-07