TLE6263 Datasheet, PDF (21/40 Pages) Infineon Technologies AG – LS CAN, LDO and HS Switch

Final Datasheet TLE 6263
7.3 Electrical Characteristics
V_S = 13.5 V; I_CC = 1 mA; normal mode; all outputs open; – 40 °C < T_j < 150 °C (max. 125°C for CAN circuit
characteristics); all voltages with respect to ground; positive current defined flowing into pin; unless otherwise
specified.
Parameter
Symbol Limit Values Unit Test Condition
min. typ. max.
Quiescent current Pin V_S
Current consumption
I_Q
I_Q = I_S - I_CC
Current consumption
I_Q
I_Q = I_S - I_CC
Current consumption
I_Q
I_Q = I_S - I_CC
Current consumption
I_Q
Current consumption
I_Q
–
5.5 10 mA ^{normal mode;}
I_CC = 30 mA;
TxD recessive
–
8
10
mA ^{normal mode;}
I_CC = 30 mA;
TxD dominant
–
300 400 µA ^{stand-by mode;}
T_j=25°C; I_CC = 1 mA;
Ibit 7 = H
–
50
80
µA ^{sleep mode; T}j^=25°C;
SPI Ibit 4 = L;
V_CC = V_CCI = 0 V
3
mA ^{OUTHS active;}
SPI Ibit 4 = H;
sleep mode;
V_CC = V_CCI = 0 V
Voltage Regulator; Pin V_CC
Output voltage
V_CC
Output voltage
Line regulation
V_CC
∆V_CC
Load regulation
∆V_CC
Power supply ripple rejection PSRR
Output current limit
Output current limit
Drop voltage
V_DR = V_S - V_CC
I_CCmax
I_CCmax
V_DR
4.9 5.0 5.1
4.8 5.0 5.2
50
50
40
110 120
120
0.5
V
0.1 mA< I_CC< 100 mA
6 V< V_I< 20 V
V
0A < I_CC < 100 µA
mV ^{6 V < V}S ^{< 16 V;}
I_CC = 1mA
mV ^{5mA< I}CC^{< 100mA;}
V_S = 6V
dB ^VS ^{< 1 Vss;}
C_Q ≥ 10µF
100Hz< f <100kHz
mA ^{note 1)}
mA ^VCC ^{= 0 V}
V
I_CC = 80 mA;
note 1)
note 1) measured when the output voltage V_CC has dropped 100 mV from the nominal value obtained at
13.5 V input voltage V_S
Version 2.08
21
2004-06-07