TLE6263 Datasheet, PDF (24/40 Pages) Infineon Technologies AG – LS CAN, LDO and HS Switch

Final Datasheet TLE 6263
7.3 Electrical Characteristics (cont’d)
V_S = 13.5 V; I_CC = 1 mA; normal mode; all outputs open; – 40 °C < T_j < 150 °C (max. 125°C for CAN circuit
characteristics); all voltages with respect to ground; positive current defined flowing into pin; unless otherwise
specified.
Parameter
Symbol Limit Values Unit Test Condition
min. typ. max.
Wake-Up Inputs WK1 / WK2
Wake-up threshold voltage V_WUth
Minimum time for wake-up t_WU
Input current
I_WK
2
3
4
V
sleep mode; Vbat-
stand-by mode
10 15 32 µs ^{sleep mode; Vbat-}
stand-by mode
-2
µA ^VWK ^{= 0 V}
High Side Output OUTHS; (controlled by bit 4 and bit 5 of SPI input word)
Static
Drain-Source
ON-Resistance;
I_OUTH3 = – 0.15 A
R _{– DSON HS}
1.0 1.5 Ω
–
3.0 Ω
2.5 3.0 Ω
–
5.0 Ω
Active zener voltage
Clamp diode forward voltage
Leakage current
Switch ON delay time
Switch OFF delay time
V_OUTHS
V_OUTHS
I_QLHS
t_dONHS
t_dOFFHS
–2
V
1
V
–4
µA
20 µs
20 µs
Overcurrent shutdown
threshold
I_SDHS
– 0.8 – 0.3 – 0.2 A
Shutdown delay time
Current limit
UV-Switch-ON voltage
UV-Switch-OFF voltage
UV-ON/OFF-Hysteresis
Cyclic sense period
(128 cyl.)
t_dSDHS
I_OCLHS
V_{UV ON}
V_{UV OFF}
V_{UV HY}
t_{P CS}
10 35 50 µs
– 1.2 – 0.6 – 0.3 A
–
5.2 6.0 V
4.5 4.7 5.2 V
–
0.5 –
V
38 65 92 ms
T_j = 25 °C
5.2 V ≤ V_S ≤ 9 V
T_j = 25 °C
5.2 V ≤ V_S ≤ 9 V
I_OUTHS = – 0.15 A
I_OUTHS = 0.15 A
V_OUTHS = 0 V
CSN high to OUTHS
CSN high to OUTHS
–
V_S increasing
V_S decreasing
V_{UV ON} – V_{UV OFF}
sleep mode
SPI-bit 4 = H,
Version 2.08
24
2004-06-07