TLE6263 Datasheet, PDF (26/40 Pages) Infineon Technologies AG – LS CAN, LDO and HS Switch

Final Datasheet TLE 6263
7.3 Electrical Characteristics (cont’d)
V_S = 13.5 V; I_CC = 1 mA; normal mode; all outputs open; – 40 °C < T_j < 150 °C (max. 125°C for CAN circuit
characteristics); all voltages with respect to ground; positive current defined flowing into pin; unless otherwise
specified.
Parameter
Symbol Limit Values Unit Test Condition
min. typ. max.
CANL recessive output
voltage
V_CANLr V_CC
-0.2
V
TxD = V_CC;
R_RTL < 4 kΩ
CANH dominant output
voltage
V_CANHd V_CC V_CC V_CC V
-1.4 -1.0
TxD = 0 V;
I_CANH = – 40 mA
CANL dominant output
voltage
V_CANLd
1.0 1.4 V
TxD = 0 V;
I_CANL = 40 mA
CANH output current
I_CANH
-110 -80
-50
mA ^VCANH ^{= 0 V;}
TxD = 0 V
-5
5
µA ^{sleep mode;}
V_CANH = 12 V
CANL output current
I_CANL
50
80
110 mA ^VCANL ^{= 5 V;}
TxD = 0 V
-5
5
µA ^{sleep mode;}
V_CANL = 0 V
Voltage detection threshold V_det(th) 6.5 7.3 8.0 V
for short-circuit to battery
voltage on CANH and CANL
CANH wake-up voltage
threshold
V_H,wk 1.2 1.9 2.7 V
low power modes
CANL wake-up voltage
threshold
V_L,wk
2.2 3.1 3.9 V
low power modes
CANH single-ended receiver V_CANH 1.6 2.1 2.6 V
threshold
failure cases 3, 5, 7
recessive to dominant
CANL single-ended receiver V_CANL 2.4 2.9 3.4 V
threshold
failure case 6 and 6a
recessive to dominant
CANL leakage current
I_CANLl -5
5
µA ^VCC ^{= 0 V, V}S ^{= 0 V,}
V_CANL = 13.5 V
CANH leakage current
I_CANHl -5
5
µA ^VCC ^{= 0 V, V}S ^{= 0 V,}
V_CANH = 5 V
Version 2.08
26
2004-06-07