|
BTM7710GP Datasheet, PDF (3/18 Pages) Infineon Technologies AG – TrilithIC | |||
|
◁ |
TrilithIC
BTM7710GP
1
Overview
Features
⢠Quad D-MOS switch driver
⢠Free configurable as bridge or quad-switch
⢠Optimized for DC motor management applications
⢠Low RDS ON
High side: 70 mΩ typ. @ 25°C, 165 mΩ max. @ 110°C
Low side: 40 mΩ typ. @ 25°C, 75 mΩ max. @ 110°C
⢠Peak current: typ. 15 A @ 25 °C
⢠Very low quiescent current: typ. 5 μA @ 25 °C
⢠Thermally optimized power package
⢠Operates up to 40 V
⢠Load and GND-short-circuit-protection
⢠Overtemperature shut down with hysteresis
⢠Undervoltage detection with hysteresis
⢠Status flag diagnosis
⢠Internal clamp diodes
⢠Isolated sources for external current sensing
⢠Green Product (RoHS compliant)
⢠AEC Qualified
PG-TO263-15-1
Description
The BTM7710GP is part of the TrilithIC family containing three dies in one package: One double high-side switch
and two low-side switches. The drains of these three vertical DMOS chips are mounted on separated lead frames.
The sources are connected to individual pins, so the BTM7710GP can be used in H-bridge- as well as in any other
configuration. The double high-side switch is manufactured in SMART SIPMOS® technology which combines low
RDS ON vertical DMOS power stages with CMOS circuitry for control, protection and diagnosis. To achieve low
RDS ON and fast switching performance, the low-side switches are manufactured in S-FET logic level technology.
Type
BTM7710GP
Datasheet
Package
PG-TO263-15-1
3
Marking
BTM7710GP
Rev. 1.0, 2008-07-07
|
▷ |