BTM7710GP Datasheet, PDF (11/18 Pages) Infineon Technologies AG – TrilithIC

BTM7710GP
5.2
Functional Range
Pos. Parameter
5.2.1 Supply voltage
5.2.2
5.2.3
5.2.4
5.2.5
Input voltage HS
Input voltage LS
Status output current
Junction temperature
Symbol Limit Values
min.
max.
V_S
V_UVOFF 42
V_IH
– 0.3 15
V_IL
– 0.3 20
I_ST
0
2
T_j
– 40
110
Unit
V
V
V
mA
°C
Remarks
After V_S rising above
V_UVON
–
–
–
–
Note: Within the functional range the IC operates as described in the circuit description. The electrical
characteristics are specified within the conditions given in the related electrical characteristics table
5.3
Thermal Resistance
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min. Typ. Max.
5.3.1
5.3.2
5.3.3
LS-junction to Case¹⁾
HS-junction to Case¹⁾
Junction to Ambient¹⁾
R_thJA = T_j(HS) / (P_(HS)+ P_(LS))
R_{thJC L} –
R_{thJC H} –
R_thJA
–
–
1.7 K/W measured to pin 3 or 12
–
1.7 K/W measured to pin 19
16 –
K/W ²⁾
1) Not subject to production test, specified by design.
2) Specified R_thJA value is according to Jedec JESD51-2,-5,-7 at natural convection on FR4 2s2p board; The Product
(chip+package) was simulated on a 76.2 x 114.3 x 1.5 mm board with 2 inner copper layers (2 x 70µm Cu, 2 x 35µm Cu).
Where applicable a thermal via array under the exposed pad contacted the first inner copper layer.
5.4
Electrical Characteristics
I_SH1 = I_SH2 = I_SL1 = I_SL2 = 0 A; – 40 °C < T_j < 110 °C; 8 V < V_S < 18 V
unless otherwise specified
Pos. Parameter
Symbol Limit Values
min. typ.
Current Consumption HS-switch
5.4.4 Quiescent current
I_S
–
5
–
–
5.4.5
Supply current;
one HS-switch active
I_S
–
1.5
5.4.6
Supply current;
both HS-switches active
I_S
–
3
5.4.7
Leakage current of
high-side switch
I_{SH LK}
–
–
5.4.8 Leakage current through logic GND I_{LKCL =} I_{FH +} –
–
in free wheeling condition
I_SH
max.
9
12
3
6
6
10
Unit Test Condition
μA IH1 = IH2 = 0 V
T_j = 25 °C
μA IH1 = IH2 = 0 V¹⁾
mA IH1 or IH2 = 5 V
V_S = 12 V
mA IH1 and IH2 = 5 V
V_S = 12 V
μA V_IH = V_SH = 0 V
V_S = 12 V
mA I_FH = 3 A
V_S = 12 V
Datasheet
11
Rev. 1.0, 2008-07-07