1EDS20I12SV Datasheet, PDF (27/33 Pages) Infineon Technologies AG – Single-channel isolated IGBT Driver

EiceDRIVER™ Safe
1EDS - slew rate control IGBT driver IC
6
Insulation characteristics
6.1
Reinforced insulation requirements according to VDE 0884-10 (pending)
Table 13 Reinforced insulation
Parameter
Installation classification per EN 60664-1, Table 1
For rated mains voltage ≤ 150 V_rms
For rated mains voltage ≤ 300 V_rms
For rated mains voltage ≤ 600 V_rms
For rated mains voltage ≤ 1000 V_rms
Climatic Classification according to IEC 68
Pollution degree (EN 60664-1)
Minimum external clearance
Minimum external creepage
Minimum Comparative Tracking Index
Maximum Repetitive Insulation Voltage
Input to output test voltage, method b
V_IORM * 1.875 = V_PR, productive test, t_m = 1 sec,
Partial discharge < 5 pC
Highest allowable overvoltage
Maximum withstanding insulation voltage, 1 min
Insulation resistance at T_s, V_IO = 500 V
Symbol
CLR
CPG
CTI
V_IORM
V_PR
Characteristic
Unit
Rated Impulse Voltage
I-IV = 4000 V
I-IV = 6000 V
I-IV = 8000 V
I-III = 8000 V
40 / 105 / 21
2
8.2
mm
8.2
>400
1420
V_pk
2662
V_IOTM
8000
V_ISO
5000
V_rms
R_IO
> 10⁹
Ω
Notes
This coupler is suitable for “reinforced insulation” only within the safety ratings. Compliance with the safety
ratings shall be ensured by means of suitable protective circuits.
6.2
Recognized under UL 1577 (pending)
Table 14 Recognized under UL 1577
Parameter
Insulation withstand voltage / 1 min
Insulation test voltage / 1 s
Symbol
V_ISO
V_ISO
Characteristic
5000
6000
Unit
V_RMS
V_RMS
Target datasheet
27
<Revision 0.73>, 05.06.2014