1EDS20I12SV Datasheet, PDF (12/33 Pages) Infineon Technologies AG – Single-channel isolated IGBT Driver

EiceDRIVER™ Safe
1EDS - slew rate control IGBT driver IC
The reference terminal for RSENSE is VCC2.
VCC2
Positive power supply terminal of the output side.
ON
Terminal for the connection to the gate terminal of an external P-channel OptiMOS™ BSD314SPE boost
transistor. This transistor is used to drive the IGBT turn-on.
The reference terminal for ON is VCC2.
CZ
This terminal sets the two-level turn-off timing via an external capacitor against VEE2. A short between
terminals CZ and VEE2 deactivates the two-level turn-off.
The reference terminal for CZ is VEE2.
VZ
Voltage adjustment terminal for the two-level turn-off feature: This terminal can be connected to VEE2 via a
resistor (9.5 V), shorted against VEE2 (11.7 V), or left floating (10.6 V).
The reference terminal for VZ is VEE2.
Target datasheet
12
<Revision 0.73>, 05.06.2014