ICE3AR10080CJZ Datasheet, PDF (21/33 Pages) Infineon Technologies AG – Off-Line SMPS Current Mode Controller with integrated 800V CoolMOS® and Startup cell (brownout & CCM) in DIP-7

CoolSET^®-F3R80
ICE3AR10080CJZ
Electrical Characteristics
4 Electrical Characteristics
Note: All voltages are measured with respect to ground (Pin 8). The voltage levels are valid if other ratings are
not violated.
4.1
Absolute Maximum Ratings
Note: Absolute maximum ratings are defined as ratings, which when being exceeded may lead to destruction
of the integrated circuit. For the same reason make sure, that any capacitor that will be connected to pin 7
(VCC) is discharged before assembling the application circuit. T_a=25°C unless otherwise specified.
Parameter
Symbol
Limit Values
Unit
Remarks
min. max.
Drain Source Voltage
Pulse drain current, t_p limited by T_jmax
Avalanche energy, repetitive t_AR limited by
max. T_j=150°C¹⁾
Avalanche current, repetitive t_AR limited by
max. T_j=150°C
VCC Supply Voltage
FBB Voltage
BRL Voltage
CS Voltage
Junction Temperature
Storage Temperature
Thermal Resistance
Junction -Ambient
Soldering temperature, wavesoldering
only allowed at leads
ESD Capability (incl. Drain Pin)
V_DS
I_{D_Puls}
E_AR
I_AR
V_VCC
V_FBB
V_BRL
V_CS
T_j
T_S
R_thJA
T_sold
V_ESD
-
800
V
-
1.10
A
-
0.011 mJ
-
0.44
A
-0.3
27
V
-0.3
5.5
V
-0.3
5.5
V
-0.3
5.5
-40
150
V
°C Controller & CoolMOS^®
-55
150
°C
-
96
K/W
-
260
°C 1.6mm (0.063in.) from
case for 10s
-
2
kV Human body model²⁾
1) _{Repetitive avalanche causes additional power losses that can be calculated as PAV=EAR*f}
2) _{According to EIA/JESD22-A114-B (discharging a 100pF capacitor through a 1.5kW series resistor)}
Version 2.0
21
11 Jan 2012