HYS72D128020GR-8-A Datasheet, PDF (2/25 Pages) Infineon Technologies AG – 2.5 V 184-pin Registered DDR-I SDRAM Modules

HYS 72Dxx0xxGR-7/8-A
Registered DDR-I SDRAM-Modules
Ordering Information
Type
Compliance Code Description
SDRAM
Technology
PC2100 (CL=2):
HYS 72D32000GR-7-A
PC2100R-20330-A1
one bank 256 MB Reg. DIMM
256 MBit (x8)
HYS 72D64000GR-7-A
PC2100R-20330-B1
one bank 512 MB Reg. DIMM
256 Mbit (x4)
HYS 72D64020GR-7-A
PC2100R-20330-A1
two banks 512 MB Reg. DIMM
256 MBit (x8)
HYS 72D128020GR-7-A PC2100R-20330-C1 two banks 1 GByte Reg. DIMM
256 MBit (x4)
(stacked)
PC1600 (CL=2):
HYS 72D32000GR-8-A
PC1600R-20220-A1
one bank 256 MB Reg. DIMM
256 MBit (x8)
HYS 72D64000GR-8-A
PC1600R-20220-B1
one bank 512 MB Reg. DIMM
256 Mbit (x4)
HYS 72D64020GR-8-A
PC1600R-20220-A1
two banks 512 MB Reg. DIMM
256 MBit (x8)
HYS 72D128020GR-8-A PC1600R-20220-C1 two banks 1 GByte Reg. DIMM
256 MBit (x4)
(stacked)
Note:
All part numbers end with a place code (not shown), designating the silicon-die revision. Reference
information available on request. Example: HYS 72D32000GR-8-A, indicating Rev.A die are used for
SDRAM components
The Compliance Code is printed on the module labels and describes the speed sort fe. “PC2100R”, the
latencies (f.e. “20330” means CAS latency = 2, trcd latency = 3 and trp latency =3 ) and the Raw Card
used for this module.
INFINEON Technologies
2
2002-05-08 (revision 1.0)