ICE3GS03LJG Datasheet, PDF (18/25 Pages) Infineon Technologies AG – Of f-Line SMPS Current Mode Controller wi th integrated 500V Startup Cell

F3 PWM controller
ICE3GS03LJG
Electrical Characteristics
4 Electrical Characteristics
Note: All voltages are measured with respect to ground (Pin 8). The voltage levels are valid if other ratings are
not violated.
4.1
Absolute Maximum Ratings
Note: Absolute maximum ratings are defined as ratings, which when being exceeded may lead to destruction
of the integrated circuit. For the same reason make sure, that any capacitor that will be connected to pin 7
(VCC) is discharged before assembling the application circuit. T_a=25°C unless otherwise specified.
Parameter
Symbol
Limit Values Unit Remarks
min. max.
HV Voltage
VCC Supply Voltage
FB Voltage
BL Voltage
CS Voltage
Junction Temperature
Storage Temperature
Thermal Resistance
Junction -Ambient
V_HV
V_VCC
V_FB
V_BL
V_CS
T_j
T_S
R_thJA
-
500
V
-0.3
27
V
-0.3
5.5
V
-0.3
5.5
V
-0.3
5.5
V
-40
150
°C
-55
150
°C
-
185
K/W
Soldering temperature,wave soldering T_sold
only allowed at leads
-
260
°C
1.6mm(0.063 in.) from case
for 10s
ESD Capability (incl. Drain Pin)
V_ESD
-
2
kV
Human body model¹⁾
1) _{According to EIA/JESD22-A114-B (discharging a 100pF capacitor through a 1.5kW series resistor)}
4.2
Operating Range
Note: Within the operating range the IC operates as described in the functional description.
Parameter
VCC Supply Voltage
Junction Temperature of
Controller
Symbol
V_VCC
T_jCon
Limit Values
min. max.
V_VCCoff 25
-25
130
Unit
V
°C
Remarks
Max. value limited due to VCC OVP
Max value limited due to thermal
shut down of controller
Version 2.0
18
1 Nov 2010