XC2361B Datasheet, PDF (17/128 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance

XC2361B, XC2363B, XC2364B, XC2365B
XC2000 Family / Value Line
General Device Information
Table 6
Pin Definitions and Functions (cont’d)
Pin Symbol
Ctrl. Type Function
6 P7.0
O0 / I St/B Bit 0 of Port 7, General Purpose Input/Output
T3OUT
O1 St/B GPT12E Timer T3 Toggle Latch Output
T6OUT
O2 St/B GPT12E Timer T6 Toggle Latch Output
TDO_A
OH / St/B JTAG Test Data Output / DAP1 Input/Output
IH
If DAP pos. 0 or 2 is selected during start-up, an
internal pull-down device will hold this pin low
when nothing is driving it.
ESR2_1
I
St/B ESR2 Trigger Input 1
7 P7.3
O0 / I St/B Bit 3 of Port 7, General Purpose Input/Output
EMUX1
O1 St/B External Analog MUX Control Output 1 (ADC1)
U0C1_DOUT O2 St/B USIC0 Channel 1 Shift Data Output
U0C0_DOUT O3 St/B USIC0 Channel 0 Shift Data Output
TMS_C
IH St/B JTAG Test Mode Selection Input
If JTAG pos. C is selected during start-up, an
internal pull-up device will hold this pin low when
nothing is driving it.
U0C1_DX0F I
St/B USIC0 Channel 1 Shift Data Input
8 P7.1
O0 / I St/B Bit 1 of Port 7, General Purpose Input/Output
EXTCLK
O1 St/B Programmable Clock Signal Output
BRKIN_C
I
St/B OCDS Break Signal Input
9 P7.4
O0 / I St/B Bit 4 of Port 7, General Purpose Input/Output
EMUX2
O1 St/B External Analog MUX Control Output 2 (ADC1)
U0C1_DOUT O2 St/B USIC0 Channel 1 Shift Data Output
U0C1_SCLK O3 St/B USIC0 Channel 1 Shift Clock Output
OUT
TCK_C
IH St/B DAP0/JTAG Clock Input
If JTAG pos. C is selected during start-up, an
internal pull-up device will hold this pin high when
nothing is driving it.
If DAP pos. 2 is selected during start-up, an
internal pull-down device will hold this pin low
when nothing is driving it.
U0C0_DX0D I
St/B USIC0 Channel 0 Shift Data Input
U0C1_DX1E I
St/B USIC0 Channel 1 Shift Clock Input
Data Sheet
17
V1.2, 2010-04