English
Language : 

PTFB183408SV Datasheet, PDF (15/15 Pages) Infineon Technologies AG – High Power RF LDMOS Field Effect Transistor
PTFB183408SV V2
Revision History
Revision
01
02
03
Date
2012-03-23
2012-06-28
2014-03-07
Data Sheet Type Page
Advance
All
Production
All
Production
All
1
3
12
13
Subjects (major changes since last revision)
Data Sheet reflects advance specification for product development
Data Sheet reflects released product specification
Updated V1 to V2, updated package & package related drawings throughout
added statement "device with straight leads" into single-carrier WCDMA measurement table
updated ordering table
updated reference design circuit - corrected mislabels of R102, C102, C110
Removed R805, corrected R801, R802, R803 in component table. updated pinout diagram to
show gullwing version
We Listen to Your Comments
Any information within this document that you feel is wrong, unclear or missing at all?
Your feedback will help us to continuously improve the quality of this document.
Please send your proposal (including a reference to this document) to:
highpowerRF@infineon.com
To request other information, contact us at:
+1 877 465 3667 (1-877-GO-LDMOS) USA
or +1 408 776 0600 International
Edition 2014-03-07
Published by
Infineon Technologies AG
85579 Neubiberg, Germany
© 2014 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics.
With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the
application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind,
including without limitation, warranties of non-infringement of intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infineon Technologies Office (www.infineon.com/rfpower).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in question,
please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with the express written approval of In-
fineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device
or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be
implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be endangered.
Data Sheet
15 of 15
Rev. 03, 2014-03-07