English
Language : 

9ZXL1231_16 Datasheet, PDF (6/18 Pages) Integrated Device Technology – 12-output DB1200ZL
9ZXL1231 DATASHEET
Electrical Characteristics–SMBus
TAMB = TCOM or TIND, unless noted., Supply Voltages per normal operation conditions, See Test Loads for Loading Conditions
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX UNITS NOTES
SMBus Input Low Voltage VILSMB
SMBus Input High Voltage VIHSMB
2.1
SMBus Output Low Voltage VOLSMB
@ IPULLUP
SMBus Sink Current
IPULLUP
@ VOL
4
Nominal Bus Voltage
VDDSMB
2.7
SCLK/SDATA Rise Time
tRSMB
(Max VIL - 0.15) to (Min VIH + 0.15)
SCLK/SDATA Fall Time
SMBus Operating
Frequency
tFSMB
fMAXSMB
(Min VIH + 0.15) to (Max VIL - 0.15)
Maximum SMBus operating frequency
1Guaranteed by design and characterization, not 100% tested in production.
2Control input must be monotonic from 20% to 80% of input swing.
3Time from deassertion until outputs are >200 mV
4DIF_IN input
5The differential input clock must be running for the SMBus to be active
0.8
V
VDDSMB
V
0.4
V
mA
3.6
V
1
1000
ns
1
300
ns
1
400
kHz
5
Electrical Characteristics–DIF_IN Clock Input Parameters
TA = TCOM; Supply Voltage VDD = 3.3 V +/-5%, VDD_IO = 1.05 to 3.3V +/-5%
PARAMETER
SYMBOL
CONDITIONS
Input High Voltage - DIF_IN VIHDIF
Differential inputs
(single-ended measurement)
Input Low Voltage - DIF_IN
VILDIF
Differential inputs
(single-ended measurement)
Input Common Mode
Voltage - DIF_IN
VCOM
Common Mode Input Voltage
Input Amplitude - DIF_IN
VSWING
Peak to Peak value
(single-ended measurement)
Input Slew Rate - DIF_IN
dv/dt
Measured differentially
Input Leakage Current
IIN
VIN = VDD , VIN = GND
Input Duty Cycle
dtin
Measurement from differential wavefrom
Input Jitter - Cycle to Cycle
JDIFIn
Differential Measurement
1 Guaranteed by design and characterization, not 100% tested in production.
2Slew rate measured through +/-75mV window centered around differential zero
MIN
TYP
600
800
VSS - 300
0
300
300
0.4
-5
45
0
MAX UNITS NOTES
1150
mV
1
300
mV
1
1000
mV
1
1450
mV
1
8
V/ns 1,2
5
uA
1
55
%
1
125
ps
1
12-OUTPUT DB1200ZL
6
REVISION J 05/25/16