ICS8536AG Datasheet, PDF (16/21 Pages) Integrated Device Technology – Low Skew, 1-to-6, Crystal LVCMOS Differential-to-3.3V, 2.5V LVPECL Fanout Buffer

ICS8536-01 Data Sheet
CRYSTAL/LVCMOS/DIFFERENTIAL-TO-LVPECL FANOUT BUFFER
3. Calculations and Equations.
The purpose of this section is to derive the power dissipated into the load.
LVPECL output driver circuit and termination are shown in Figure 7.
V
CC
Q1
V_OUT
RL
50
V_CC - 2V
FIGURE 7. LVPECL DRIVER CIRCUIT AND TERMINATION
To calculate power dissipation due tothe load, use the following equations which assume a 50Ω load, and a termination
voltage of V - 2V.
CC
• For logic high, V = V = V – 0.9V
OUT
OH_MAX
CC_MAX
(V - V ⁾ = 0.9V
CC_MAX
OH_MAX
• For logic low, V = V = V – 1.7V
OUT
OL_MAX
CC_MAX
(V - V ⁾ = 1.7V
CC_MAX
OL_MAX
Pd_H is power dissipation when the output drives high.
Pd_L is the power dissipation when the output drives low.
Pd_H = [(V – (V - 2V))/R ] * (V - V ) = [(2V - (V - V ^))/R ] * (V - V ) =
OH_MAX
CC_MAX
L
CC_MAX
OH_MAX
[(2V - 0.9V)/50Ω] * 0.9V = 19.8mW
CC_MAX
OH_MAX
L
CC_MAX
OH_MAX
Pd_L = [(V – (V - 2V))/R ] * (V - V ) = [(2V - (V - V ^))/R ] * (V - V ) =
OL_MAX
CC_MAX
L
CC_MAX
OL_MAX
CC_MAX
OL_MAX
L
CC_MAX
OL_MAX
[(2V - 1.7V)/50Ω] * 1.7V = 10.2mW
Total Power Dissipation per output pair = Pd_H + Pd_L = 30mW
ICS8536AG-01 REVISION B AUGUST 17, 2012
16
©2012 Integrated Device Technology, Inc.