ICS854S006I Datasheet, PDF (10/15 Pages) Integrated Device Technology – Low Skew, 1-to-6, Differential-to - LVDS Fanout Buffer One differential clock input pair

ICS854S006I Data Sheet
LOW SKEW, 1-TO-6, DIFFERENTIAL-TO-LVDS FANOUT BUFFER
3.3V, 2.5V LVDS DRIVER TERMINATION
A general LVDS interface is shown in Figure 3. In a 100Ω
differential transmission line environment, LVDS drivers
require a matched load termination of 100Ω across near
the receiver input. For a multiple LVDS outputs buffer, if only
partial outputs are used, it is recommended to terminate the
unused outputs.
VDD
LVDS_Driv er
R1
100
100 Ohm Differential Transmission Line
2.5V or 3.3V
+
-
FIGURE 3. TYPICAL LVDS DRIVER TERMINATION
ICS854S006AGI REVISION B JANUARY 18, 2010
10
©2010 Integrated Device Technology, Inc.