IS61NW6432 Datasheet, PDF (9/14 Pages) Integrated Circuit Solution Inc – 64K x 32 SYNCHRONOUS STATIC RAM WITH NO-WAIT STATE BUS FEATURE

IS61NW6432
OPERATING RANGE
Range
Commercial
Ambient Temperature
0°C to +70°C
VCC
3.3V +10%, –5%
DC ELECTRICAL CHARACTERISTICS⁽¹⁾ (Over Operating Range)
Symbol Parameter
VOH
Output HIGH Voltage
VOL
Output LOW Voltage
VIH
Input HIGH Voltage
VIL
Input LOW Voltage
ILI
Input Leakage Current
ILO
Output Leakage Current
Test Conditions
IOH = –5.0 mA
IOL = 5.0 mA
GND < VIN < VCCQ
GND < VOUT < VCCQ, OE = VIH
Min.
Max.
Unit
2.4
—
V
—
0.4
V
1.7 VCCQ + 0.3 V
–0.3
0.8
V
Com. –5
5
µA
Com. –5
5
µA
POWER SUPPLY CHARACTERISTICS (Over Operating Range)
Symbol Parameter
Test Conditions
-5
-6
-7
-8
Min.Typ. Max. Min.Typ.Max. Min.Typ.Max. Min.Typ.Max. Unit
ICC AC Operating Device Selected, Com. — — 230 — — 220 — — 210 — — 200 mA
Supply Current All Inputs = VIL or VIH
OE = VIH,Cycle Time > tKC min.
ISB Standby Current Device Deselected, Com. — — 60
VCC = Max.,
All Inputs= VIH or VIL
— — 60 — — 60
— — 60 mA
CLK Cycle Time > tKC min.
CEN=VIH
Note:
1. MODE pin has an internal pull up. This pin may be a No Connect, tied to GND, or tied to VCCQ.
2. MODE pin should be tied to Vcc or GND. It exhibit ±30 µA maximum leakage current when tied to < GND + 0.2V or > Vcc – 0.
2V.
Integrated Circuit Solution Inc.
9
SSR006-0B