IC-PR Datasheet, PDF (5/18 Pages) IC-Haus GmbH – REFLECTIVE OPTO ENCODERS

iC-PR Series
REFLECTIVE OPTO ENCODERS
Rev A3, Page 5/18
ABSOLUTE MAXIMUM RATINGS
These ratings do not imply operating conditions; functional operation is not guaranteed. Beyond these ratings device damage may occur.
Item Symbol Parameter
No.
Conditions
Min.
Unit
Max.
G001 VCC
Voltage at VCC
-0.3
6
V
G002 I(VCC) Current in VCC
-20
100
mA
G003 VDD
Voltage at VDD
-0.3
6
V
G004 I(VDD) Current in VDD
-20
100
mA
G005 I()
Pin Current, all signal outputs
-20
20
mA
G006 Vd()
Electrostatic Discharge
Margin vs. ESD Susceptibility according to
2
JEDEC, all pins ^1,2
G007 Tj
Junction Temperature
-40
150
°C
G008 Ts
Chip Storage Temperature
-40
150
°C
1 _{JEDEC document JEP 155: 500V HBM allows safe manufacturing with a standard ESD control process}
2 _{JEDEC document JEP 157: 250V CDM allows safe manufacturing with a standard ESD control process}
THERMAL DATA
Operating conditions: VCC = 4.5...5.5 V, VDD = 3.0...5.5 V
Item Symbol Parameter
No.
Conditions
T01 Ta
Operating Ambient Temperature Range
T02 Ts
Permissible Storage Temperature
Range
T03 Tpk
Soldering Peak Temperature
tpk < 20 s, convection reflow
tpk < 20 s, vapor phase soldering
Unit
Min. Typ. Max.
-40
105 °C
-40
105 °C
245 °C
230 °C
MSL 5A (max. floor live 24 h at 30 °C and 60 %
RH);
Please refer to customer information file No. 7
for details.
T04 Rthja
Thermal Resistance Chip to Ambient package mounted on PCB according to
JEDEC standard
50
K/W
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.