IC-NQL Datasheet, PDF (5/24 Pages) IC-Haus GmbH – 13-bit Sin/D CONVERTER WITH SSI INTERFACE

iC-NQL
13-bit Sin/D CONVERTER WITH SSI INTERFACE
Rev B1, Page 5/24
ABSOLUTE MAXIMUM RATINGS
These ratings do not imply operating conditions; functional operation is not guaranteed. Beyond these ratings device damage may occur.
Item Symbol Parameter
No.
Conditions
Min.
Unit
Max.
G001 VDDA
Analog Supply Voltage
-0.3
6
V
G002 VDD
Digital Supply Voltage
-0.3
6
V
G003 Vpin()
Voltage at
PSIN, NSIN, PCOS, NCOS, PZERO,
NZERO, VREF, NERR, SCL,
SDA, CLK, DATA, A, B, Z
G004 Imx(VDDA) Current in VDDA
V() < VDDA + 0.3 V
V() < VDD + 0.3 V
-0.3
6
V
-50
50
mA
G005 Imx(GNDA) Current in GNDA
-50
50
mA
G006 Imx(VDD) Current in VDD
-50
50
mA
G007 Imx(GND) Current in GND
-50
50
mA
G008 Imx()
Current in
PSIN, NSIN, PCOS, NCOS, PZERO,
NZERO, VREF, NERR, SCL, SDA,
CLK, DATA, A, B, Z
-10
10
mA
G009 Ilu()
Pulse Current in all pins
(Latch-up Strength)
according to Jedec Standard No. 78;
Ta = 25 °C, pulse duration to 10 µs,
VCC = VCCmax, VDD = VDDmax,
Vlu() = (-0.5...+1.5) x Vpin()max
-100
100
mA
G010 Vd()
ESD Susceptibility at all pins
HBM 100 pF discharged through 1.5 kΩ
2
kV
G011 Tj
Junction Temperature
-40
150
°C
G012 Ts
Storage Temperature Range
-40
150
°C
THERMAL DATA
Operating Conditions: VDDA = VDD = 5 V ±10 %
Item Symbol Parameter
No.
Conditions
T01 Ta
Operating Ambient Temperature Range
(extended temperature range of
-40 to 125 °C available on request)
Unit
Min. Typ. Max.
-25
85 °C
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.