IC-NQC_11 Datasheet, PDF (5/29 Pages) IC-Haus GmbH – 13-bit Sin/D CONVERTER WITH SIGNAL CALIBRATION

iC-NQC
preliminary
13-bit Sin/D CONVERTER WITH SIGNAL CALIBRATION
Rev D1, Page 5/29
ABSOLUTE MAXIMUM RATINGS
These ratings do not imply permissible operating conditions; functional operation is not guaranteed.
Exceeding these ratings may damage the device.
Item Symbol Parameter
No.
Conditions
G001 VDDA
Voltage at VDDA
G002 VDD
Voltage at VDD
G003 Vpin()
Voltage at
PSIN, NSIN, PCOS, NCOS, PZERO,
NZERO, VREF, NERR, SCL,
SDA, MA, SLI, SLO, A, B, Z
V() < VDDA + 0.3 V
V() < VDD + 0.3 V
G004 Imx(VDDA) Current in VDDA
G005 Imx(GNDA) Current in GNDA
G006 Imx(VDD) Current in VDD
G007 Imx(GND) Current in GND
G008 Imx()
Current in
PSIN, NSIN, PCOS, NCOS, PZERO,
NZERO, VREF, NERR, SCL, SDA,
MA, SLI, SLO, A, B, Z
G009 Ilu()
G010 Vd()
Pulse Current in all pins
(Latch-up Strength)
ESD Susceptibility at all pins
according to Jedec Standard No. 78;
Ta = 25 °C, pulse duration to 10 ms,
VDDA = VDDAmax, VDD = VDDmax,
Vlu() = (-0.5...+1.5) x Vpin()max
HBM 100 pF discharged through 1.5 kΩ
G011 Tj
Junction Temperature
G012 Ts
Storage Temperature Range
Min.
-0.3
-0.3
-0.3
Unit
Max.
6
V
6
V
6
V
-50
50
mA
-50
50
mA
-50
50
mA
-50
50
mA
-10
10
mA
-100
100
mA
2
kV
-40
150
°C
-40
150
°C
THERMAL DATA
Operating Conditions: VDDA = VDD = 5 V ±10 %
Item Symbol Parameter
No.
Conditions
T01 Ta
Operating Ambient Temperature Range
(extended temperature range of
-40 to 125 °C available on request)
Unit
Min. Typ. Max.
-25
85 °C
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.