IC-GF Datasheet, PDF (5/26 Pages) IC-Haus GmbH – TRANSCEIVER

iC-GF
TRANSCEIVER
Rev C1, Page 5/26
ABSOLUTE MAXIMUM RATINGS
Beyond these values damage may occur; device operation is not guaranteed. Absolute Maximum Ratings are no operating conditions!
Integrated circuits with system interfaces, e.g. via cable accessible pins (I/O pins, line drivers) are per principle endangered by injected
interferences, which may compromise the function or durability. The robustness of the devices has to be verified by the user during system
development with regards to applying standards and ensured where necessary by additional protective circuitry. By the manufacturer
suggested protective circuitry is for information only and given without responsibility and has to be verified within the actual system with
respect to actual interferences.
Item Symbol
No.
G001 VBO
Parameter
Power Supply at VBO
Conditions
Referenced to lowest voltage of VN, VBR,
QP1, QN1, QP2, QN2, CFI, VH, VHL
Referenced to highest voltage of VN, VBR,
QP1, QN1, QP2, QN2, CFI, VH, VHL
Min.
-36
Unit
Max.
36
V
V
G002 I(VBO) Current in VBO
-10
600
mA
G003 VBR
Voltage at VBR
Referenced to lowest voltage of VN, VBO,
36
V
QP1, QN1, QP2, QN2, CFI, VH, VHL
Referenced to highest voltage of VN, VBO,
-36
V
QP1, QN1, QP2, QN2, CFI, VH, VHL
G004 I(VBR) Current in VBR
-10
600
mA
G005 Cl(VBR) Capacitive load at VBR
3.3
µF
G006 V(VH)
Voltage at VH
Referenced to lowest voltage of VN, VBR,
36
V
VBO, QP1, QN1, QP2, QN2, CFI, VHL
Referenced to highest voltage of VN, VBR,
-36
V
VBO, QP1, QN1, QP2, QN2, CFI, VHL
G007 I(VH)
G008 V(VHL)
Current in VH
Voltage at VHL
-5
70
mA
Referenced to lowest voltage of VN, VBR,
36
V
VBO, QP1, QN1, QP2, QN2, CFI, VH
Referenced to highest voltage of VN, VBR,
-36
V
VBO, QP1, QN1, QP2, QN2, CFI, VH
G009 I(VHL) Current in VHL
-150
5
mA
G010 V(VN)
Voltage at GND vs. VN
-2
2
V
G011 I(VN)
Current in VN
VN < VBO
VN > VBO
-500
500
mA
-10
10
mA
G012 V()
Voltage at VCC, VCC3
-0.3
7
V
G013 I()
Current in VCC, VCC3
-50
10
mA
G014 V()
Voltage at QP1, QN1, QP2, QN2
Referenced to lowest voltage of VN, VBO,
36
V
VBR, QP1, QN1, QP2, QN2, CFI, VH, VHL
Referenced to highest voltage of VN, VBO,
-36
V
VBR, QP1, QN1, QP2, QN2, CFI, VH, VHL
G015 I()
Current in QP1, QP2
-400
mA
G016 I()
Current in QN1, QN2
400
mA
G017 V(CFI) Voltage at CFI
Referenced to lowest voltage of VN, VBO,
36
V
VBR, QP1, QN1, QP2, QN2, VH, VHL
Referenced to highest voltage of VN, VBO,
-36
V
VBR, QP1, QN1, QP2, QN2, VH, VHL
G018 I(CFI)
Current in CFI
-4
4
mA
G019 V()
Voltage at INV1, QCFG1, QCFG2, IN1,
IN2, OEN, CFP
-0.3
7
V
G020 I()
Current in INV1, QCFG1, QCFG2, IN1,
IN2, OEN, CFP
-4
4
mA
G021 V()
Voltage at NOVL, NUVD, CFO
-0.3
7
V
G022 I()
Current in NOVL, NUVD, CFO
-5
20
mA
G023 V(ISET) Voltage at ISET
-0.3
7
V
G024 I(ISET) Current in ISET
-4
4
mA
G025 Vd()
ESD Susceptibility at all pins
HBM, 100 pF discharged through 1.5 kΩ
2
kV
G026 Tj
Junction Temperature
-40
150
°C
G027 Ts
Storage Temperature Range
-40
150
°C
All voltages are referenced to ground unless otherwise stated.
All currents into the device pins are positive; all currents out of the device pins are negative.