GMS30004 Datasheet, PDF (99/158 Pages) Hynix Semiconductor – 4-BIT SINGLE CHIP MICROCOMPUTERS

Chapter 5. Software
? (help)
[Function]
To display the list of commands of this simulator.
[Format]
?ã
[Explanation]
With this, the system displays the list of commands of this simulator.
[e.g]
>?ã
GSEN-GMS30K Simulator Processor is GMS30K Series Version 1.0
A[<address>] - assemble
LOGON - command logging start
BAT <filename> - command repeat
LOGOFF - command logging end
BC [bc] - breakpoint clear
LP <filename>-load program from PC-DOS
BL -list breakpoint(s)
MPP <range> <address> - move
BP [bp] <address> - set breakpoint
MPS <range> <address> - move
[S] <step> - set step breakpoint
P <address> - port input/output
CR - CPU reset
Q - quit
DD - dump data memory
R [<reg>] [[=] <value>] - register
DPP [<range>] - dump program memory SET <value> <range> - simulator setup
DPS [<range>] - dump program memory SL - <filename> - symbol file load
ED [<address>]-exchange data memory
ST - simulator status dump
EPP[<address>]-exchange program memory TMT <mc> <clock rate> - machine time
EPS[<address>]-exchange program memory TMC <time> <clock rate> - step
FD <range> <h> - fill program memory
T [=<address>] [<value>] - trace
FPP <range> <hh> - fill program memory U [<range>] - unassemble
FPS <range> <hh> - fill program memory WP <filename> - write program
G [=<address> [<address>..]] - go
? - help dump
H <value> <value> - hexa add, hexa sub ^A - command recall
![DOS command] - shell escape
DPP, EPP, FPP, MPP=polynomial address DPS, EPS, FPS, MPS=sequential address
5 - 45