GMS30004 Datasheet, PDF (71/158 Pages) Hynix Semiconductor – 4-BIT SINGLE CHIP MICROCOMPUTERS

Chapter 5. Software
22) MPS (Move Program memory)
To transfer data in the memory area to another area.
23) P (Port set)
To set the specified data at the specified I/O register.
24) Q (Quit)
To return to MS-DOS*.
25) R (Register dump or change)
To display or modify the register data.
26) SET (setup)
To set the operation Mode for the simulator.
27) SL (Symbol file Load)
To load symbol tables from the specified symbol file.
28) ST (Status)
To display the simulator status.
29) T (Trace)
To execute the program in the specified program memory address a single step.
30) TMT(Time)
To obtain time from the No. of machine cycles and clock frequency.
31) TMC (Time)
To obtain No. of machine cycle from the time and clock frequency.
32) U (Unassemble)
To unassemble data in the area specified with <In> from the specified <address>
and display in mnemonic.
33) Wp (Write Program to MS-DOS* file)
To read-out data in all the ROM area and write the Intel hexa data in the files
specified with <file name>.
34) ? (Help)
To display the list of commands of this simulator
5 - 17