FH26-13S-0.3SHW Datasheet, PDF (9/16 Pages) Hirose Electric – 0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

BOperation and Precautions
Operation
1.FPC insertion procedure. Connector installed on the board.
1 Lift up the actuator. Use thumb or index finger.
2 Fully insert the FPC in the connector parallel to
mounting surface, with the exposed conductive
traces facing down.
3 Rotate down the actuator until firmly closed. It is
critical that the inserted FPC is not moved and
remains fully inserted.
FPC conductor
surface (Bottom side)
2.FPC removal
1 Lift up the actuator. Carefully withdraw the
FPC.
9