FH26-13S-0.3SHW Datasheet, PDF (1/16 Pages) Hirose Electric – 0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
FH26 Series
qSpace saving(51 pos. shown)
3.2mm
16.8mm
Metal fittings do no protrude
outside of the connector body
sFeatures
1. Extremely light weight
The typical version, with all 51 contacts loaded, weights
only 0.1 grams.
2. Easy solderability on the PC board
The soldering leads are on 0.6 mm pitch, exiting on front
and back of the connector.
3. Conductive traces on the PCB can run under
the connector
No exposed contacts on the bottom of the connector.
4. Easy FPC insertion and reliable electrical
connection
Proven Flip LockR actuator allows easy insertion of FPC.
Tactile sensation when fully closed confirms complete
electrical and mechanical connection.
5. Accepts standard thickness FPC
0.2mm thick standard Flexible Printed Circuit board can
be used.
This is the only ultra-low profile ZIF connector allowing
the use of standard FPC.
6. Board placement with automatic equipment
Flat top surface and packaging on the tape-and-reel
allows use of vacuum nozzles.
Standard reel contains 5,000 connectors.
qCan be mounted over conductive traces.
No exposed contacts on the bottom
of the connector
qOperation
((11)) AAccttuuaattoorr ooppeenn
((22)) IInnsseerrtt FFPPCC
"DUVBUPS
q
w
FPC
sApplications
Mobile phones, PDA's, digital cameras, digital video
cameras, LCD connections, plasma displays (PDP), camera
modules and other compact devices requiring Flexible
Printed Circuit connections using high reliability ultra-small
profile connectors.
((33)) CClloossee tthhee aaccttuuaattoorr
((44)) FFPPCC ccoonnnneecctteedd
e
r
2004.8
1