FH26-13S-0.3SHW Datasheet, PDF (13/16 Pages) Hirose Electric – 0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

Precautions
Removing the FPC
Rotate the actuator to the open position (maximum open angle of 135°). Carefully withdraw the FPC.
135˚
Other Precautions
SHand Soldering Precautions
When hand soldering:
1 Do not perform reflow or hand soldering with the FPC inserted in the connector.
2 Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.
3 Do not use excessive amount of solder or flux compounds.
Operation of the actuator and contacts may be affected by excessive amounts of solder or flux
compounds.
13