FX15 Datasheet, PDF (22/24 Pages) Hirose Electric – 1mm Pitch Wire-to-Board Connectors supporting LVDS signal

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal
Precautions and recommendations
◆Handling of Connectors after Mating
Do not to apply excessive force to the connectors when routing the cable after mating.
Pulling on the entire cable with a force of 20N or greater can damage the connector. Please take care not to pull the cable.
◆Un-mating of the connectors
Equally depress both sides of the latch-locks as shown on the illustration and pull the plug straight out. Do not pull on the
cables!
1
Press
B
1
Press
1
Press
2Pull straight back.
B
1
Press
B
Lock latches
B
22