English
Language : 

FX15 Datasheet, PDF (2/24 Pages) Hirose Electric – 1mm Pitch Wire-to-Board Connectors supporting LVDS signal
FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal
■Product Specifications
Ratings
Current rating
Voltage rating
0.5A
100V AC
Operating temperature range
Storage temperature range
-55ç to +80ç (Note 1)
-10ç to +60ç (Note 2)
Item
1. Contact resistance
2. Insulation resistance
3. Withstanding voltage
4. Insertion-Extraction force
Specification
60mø max. (Note 3)
500Mø min.
No flashover or insulation breakdown.
2N min., 30N max.
Conditions
1mA
100V DC
300V AC/one minute
With corresponding connector
5. Mating cycles
Contact resistance : 80mø max.(Note 3)
50 cycles
6. Vibration resistance
7. Shock resistance
8. Humidity resistance
9. Temperature cycle
10. Salt spray
No electrical discontinuity of 1µs or more.
No electrical discontinuity of 1µs or more.
Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 2 hours, 3 axis
Acceleration of 490m/s2, 11ms durations, sine half-wave waveform, 3 cycles, 3axis.
Contact resistance : 80mø max.
No damage, cracks, or parts dislocation.(Note 3)
96 hours at 40ç, RH 90% to 95%
Contact resistance : 80mø max. (Note 3)
Insulation resistance : 500Mø min.
Temperature : -55ç → +15ç to +35ç → +85ç → +15ç to +35ç
Time
: 30 → 5 → 30 → 5 (Minutes) 5 cycles
Contact resistance : 80mø max. (Note 3)
No corrosions
5% water solution for 48 hours.
Note 1 : Includes temperature rise caused by current flow.
Note 2 : The term “storage” refers to products stored for long period of time prior to mounting and use. Operating
temperature and humidity range includes non-conducting condition of installed connectors in storage, shipment or
during transportation.
Note 3 : Includes wire conductor resistance (12mm long).
■Materials / Finish
●Receptacle
Component
Insulator
Contact
Metal shell (shielded version only)
Metal fittings (shielded version only)
●Plug
Insulator
Component
Contact
Metal shell (shielded version only)
Metal latch locks (shielded version only)
Metal shell, metal latch locks
(on micro coax version only)
Material
Polyamide
Phosphor bronze
FX15S : Nickel silver
FX15SC : Stainless steel
Phosphor bronze
Material
Polyamide
Phosphor bronze
Nickel silver
Stainless steel
Stainless steel
Finish
Color : Black
Contact area : Gold plated
Termination area : Tin plated
FX15S : ---------------
FX15SC : Tin plated
Selective gold flash plated
Finish
Color : Black
Contact area : Gold plated
Termination area : Tin plated
---------------
---------------
Nickel plated
Remarks
UL94V-0
---------------
---------------
---------------
Remarks
UL94V-0
---------------
---------------
---------------
---------------
■Product Number Structure
●Receptacle
FX15 S - 31 S - 0.5 SH (**)
q w er t y
!1
●Plug
FX15 S - 31 P - C
q w er u
●Crimp contact
FX15 - 3032 PCF B
q
i
o !0
qSeries Name
: FX15
wConfiguration
Blank
15S
15SC
15M
: With shields (or crimp contact)
: With shields – enhanced shielding
: With shields – enhanced shielding
(PCB mounting pattern : VESA standard)
: Without shields
eNumber of contacts
rConnector type
P
: Male contact
S
: Female contact
tContact pitch
: 0.5 mm
yHousing configuration
SH
SV
: Right angle
: Straight
uTermination
C
: Crimp
0.5SD : Micro-coaxial cable
GND : Separate ground plate
iApplicable conductor
2830
3032
: 28 to 30 AWG
: 30 to 32 AWG
oPackaging
!0Plating (contact area)
!1Packaging
PCF
B
Blank
(30)
: Male contact / reel
: Gold plated
: Embossed Packaging (1,000 pcs/reel)
: Embossed Packaging (100 pcs/reel)
2