FH43B Datasheet, PDF (2/12 Pages) Hirose Electric – 0.2 MM PITCH, 0.9 MM ABOVE THE BOARD, FLEXIBLE PRINTED CIRCUIT ZIF CONNECTORS

FH43B Series●0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors
■Specifications
Ratings
Current rating 0.2 A
Voltage rating 30 Vrms AC
Operating
temperature range
Operating
humidity range
-55 to +85°C (Note 1)
Storage
temperature range
-10 to +50°C (Note 2)
Relative humidity 90% max. Storage
(No condensation)
humidity range
Relative humidity 90%
max. (No condensation)
Recommended FPC Thickness
0.2 ± 0.02 mm, Gold plated contact pads
Item
Specification
1. Insulation resistance 50 Mø min.
2. Withstanding voltage No flashover or insulation breakdown
100 mø max.
3. Contact resistance
* Including FPC conductor resistance
Conditions
100 V DC
90 Vrms AC / one minute
1 mA, AC max (AC: 1kHz)
4. Durability
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
10 cycles
5. Vibration
No electrical discontinuity of 1μs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
Frequency: 10 to 55 Hz, single amplitude of 0.75mm,
10 cycles in each of the 3 axis
6. Shock
No electrical discontinuity of 1μs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
Acceleration of 981m/s², 6 ms duration, sine halfwave,
3 cycles in each of the 3 axis
7. Humidity
(Steady state)
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
96 hours at 40°C and humidity of 90 to 95%
8. Temperature cycle
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
Temperature : -55°C → +15°C to +35°C → +85°C→ +15°C to +35°C
Time: 30 → 2 to 3 → 30 → 2 to 3 minutes
5 cycles
9. Resistance to
soldering heat
Reflow: At the recommended temperature profile
No deformation of components affecting performance
Manual soldering: 350°C ±10°C for 5 seconds
Note 1. Includes temperature rise caused by current flow.
Note 2. The term "storage" refers to products stored for a long period prior to mounting and use.
The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or
during transportation after board mounting.
Note 3. Information contained in this catalog represents general requirements for this Series.
Contact us for the drawings and specifications for a specific part number shown.
■Materials
Part
Insulator
Contacts
Metalfittings
Material
LCP
PA
Phosphor bronze
Finish
Color:Beige
Color:Black
Gold plated
Pure tin reflow plated
Remarks
UL94V-0
---------
---------
■Ordering information
FH 43B − 51S − 0.2 SHW ⁽¹⁰⁾
1
2
3
4
5
6
1 Series name : FH
2 Series No.: 43B
3 Number of positions : 21to81
4 Contact pitch : 0.2mm
5 Termination type :
SHW…SMT horizontal staggered row mount type
6 Plating specifications
(10)…Gold plating with nickel barrier
2