FH36 Datasheet, PDF (2/12 Pages) Hirose Electric – 0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors

FH36 Seriesq0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors
sSpecifications
Rating
Current rating
0.2 A DC (Note 1)
Operating
temperature range
-55 to +85°C (Note 2)
Storage
temperature range
-10 to +50°C (Note 3)
Voltage rating 30 Vrms AC
Operating
Relative humidity 90% Storage
Relative humidity 90%
humidity range max. (No condensation) humidity range max. (No condensation)
Recommended FPC Thickness: 0.2±0.03mm Gold plated
Item
1.Insulation resistance
2.Withstanding voltage
3.Contact resistance
4.Durability
5.Vibration
6.Shock
7.Humidity
(Steady state)
8.Temperature cycle
Specification
50 Mø min
No flashover or insulation breakdown
100 mø max.
* Including FPC conductor resistance
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
No electrical discontinuity of 1 µs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
No electrical discontinuity of 1 µs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
Conditions
100 V DC
90 Vrms AC / one minute
1 mA
10 cycles
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm
10 cycles in each of the 3 directions
Acceleration of 981m/s², 6 ms duration,
sine half-wave, 3 cycles in each of the 3 axis
96 hours at a temperature of 40°C and humidity of
90 to 95%
Temperature:-55ç➝+15ç to +35ç➝+85ç➝+15ç to +35ç
Time: 30➝ 2 to 3 ➝ 30➝ 2 to 3 minutes
5 cycles
9.Resistance to
soldering heat
No deformation of components affection performance. ^{1) Reflow: At the recommended temperature profile.}
2) Manual soldering: 350ç ± 10ç for 5 seconds
Note 1: When passing the current through all of the contacts, use 70% of the rated current.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for a long period prior to mounting and use.
The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage,
shipment or during transportation.
Note 4: Small blisters of the molding compounds in small areas will not affect form, fit or function.
Note 5: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
sMaterials
Part
Insulator
Actuator
Contacts
Metal fittings
Material
LCP
PA
Phosphor bronze
Finish
Color: Beige
FH36 series: Dark brown
FH36W series: Light brown
Gold plating
Pure tin reflow plating
Remarks
UL94V-0
UL94HB
-----------------
-----------------
sOrdering information
FH 36 W - 51S - 0.3 SHW (50)
1
23
4
5
6
7
1 Series name
: FH
2 Series No.
: 36
3 Blank :Standard
W :Halogen-free
(Flame retardance UL94HB).
4 Number of positions : 11 to 61
5 Contact pitch : 0.3mm
6 Termination type: SMT horizontal staggered mounting type
7 Plating specifications (50)…Gold plating with nickel barrier
2