DS07-16303-3E Datasheet, PDF (61/97 Pages) Fujitsu Component Limited. – 32-bit RISC Microcontroller CMOS FR30 Series

MB91121
s ELECTRICAL CHARACTERISTICS
1. Absolute Maximum Ratings
Parameter
Power supply voltage
Analog supply voltage
Analog reference voltage
Input voltage
Analog pin input voltage
Output voltage
“L” level maximum output current
“L” level average output current
“L” level maximum total output current
“L” level average total output current
“H” level maximum output current
“H” level average output current
“H” level maximum total output current
“H” level average total output current
Power consumption
Operating temperature
Storage temperature
Symbol
VCC
AVCC
AVRH
VI
VIA
VO
IOL
IOLAV
ΣIOL
ΣIOLAV
IOH
IOHAV
ΣIOH
ΣIOHAV
PD
TA
Tstg
Value
Min.
Max.
VSS − 0.3
VSS + 3.6
VSS − 0.3
VSS + 3.6
VSS − 0.3
VSS + 3.6
VSS − 0.3
VCC + 0.3
VSS − 0.3
AVCC + 0.3
VSS − 0.3
VCC + 0.3

10

4

100

50

−10

−4

−50

−20

600
0
+70
−55
+150
(VSS = AVSS = 0.0 V)
Unit
Remarks
V
V
*1
V
*1
V
V
V
mA *2
mA *3
mA
mA *4
mA *2
mA *3
mA
mA *4
mW
°C
°C
*1 : Care must be taken that AVCC and AVRH do not exceed VCC + 0.3 V, such as when turning on the device.
Also, care must be taken that AVRH does not exceed AVCC.
*2 : Maximum output current is a peak current value measured at a corresponding pin.
*3 : Average output current is an average current for a 100 ms period at a corresponding pin.
*4 : Average total output current is an average current for a 100 ms period for all corresponding pins.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
61