MB82DP02183D Datasheet, PDF (6/33 Pages) Fujitsu Component Limited. – 32M Bit (2 M word × 16 bit) Mobile Phone Application Specific Memory

MB82DP02183D-65L
■ ABSOLUTE MAXIMUM RATINGS
Parameter
Value
Symbol
Unit
Min
Max
Voltage of VDD Supply Relative to VSS*
VDD
− 0.5
+ 3.6
V
Voltage at Any Pin Relative to VSS*
VIN, VOUT
− 0.5
+ 3.6
V
Short Circuit Output Current
IOUT
− 50
+ 50
mA
Storage Temperature
TSTG
− 55
+ 125
o_C
* : All voltages are referenced to VSS.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■ RECOMMENDED OPERATING CONDITIONS
Parameter
Value
Symbol
Unit
Min
Max
VDD (31)
3.1
3.5
V
Supply Voltage*^1, *²
VDD (26)
2.6
3.1
V
VSS
0
0
V
High Level Input Voltage *^1, *^2, *³
VIH (31)
VIH (26)
VDD × 0.8 VDD + 0.2 ( ≤ 3.6)
V
VDD × 0.8
VDD + 0.2
V
Low Level Input Voltage *^1, *⁴
VIL
− 0.3
VDD × 0.2
V
Ambient Temperature
TA
− 30
+ 85
°C
Junction Temperature
TJ
− 30
+90
°C
*1 : All voltages are referenced to VSS.
*2 : This device supports both VDD(31) and VDD(26) voltage ranges on an identical device. VDD range is divided into two
ranges as VDD(31) and VDD(26) on the table due to VIH varied according to VDD supply voltage.
*3 : Maximum DC voltage on input and I/O pins is VDD + 0.2 V. During voltage transitions, inputs may overshoot to
VDD + 1.0 V for the period of up to 5 ns.
*4 : Minimum DC voltage on input or I/O pins is -0.3 V. During voltage transitions, inputs may undershoot VSS to
-1.0 V for the period of up to 5 ns.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
6