|
MB15F03 Datasheet, PDF (11/22 Pages) Fujitsu Component Limited. – Dual Serial Input PLL Frequency Synthesizer | |||
|
◁ |
s PHASE DETECTOR OUTPUT WAVEFORM
frIF/RF
fpIF/RF
tWU
LD
(FC bit = High)
H
DoIF/RF
Z
(FC bit = Low)
DoIF/RF
Z
tWL
L
MB15F03
LD Output Logic Table
IFâPLL section
RFâPLL section
LD output
Locking state / Power saving state Locking state / Power saving state
H
Locking state / Power saving state Unlocking state
L
Unlocking state
Unlocking state
Locking state / Power saving state
L
Unlocking state
L
Note: ⢠Phase error detection range = â2Ï to +2Ï
⢠Pulses on DoIF/RF signals are output to prevent dead zone.
⢠LD output becomes low when phase error is tWU or more.
⢠LD output becomes high when phase error is tWL or less and continues to be so for three cycles or more.
⢠tWU and tWL depend on OSCin input frequency as follows.
tWU > 8/fosc: i.e. tWU > 625ns when foscin = 12.8 MHz
tWL < 16/fosc: i.e. tWL < 1250ns when foscin = 12.8 MHz
11
|
▷ |