33810_11 Datasheet, PDF (6/37 Pages) Freescale Semiconductor, Inc – Automotive Engine Control IC Quad injector driver with Parallel/SPI control

ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 2. Maximum Ratings (continued)
All voltages are with respect to ground unless otherwise noted.
Ratings
Symbol
Value
Unit
Notes
1. Exceeding these limits may cause malfunction or permanent damage to the device.
2. ESD data available upon request.
3. ESD testing is performed in accordance with the Human Body Model (HBM) (AEC-Q100-002), the Machine Model (MM) (AEC-Q100-
003), and the Charge Device Model (CDM), Robotic (AEC-Q100-011).
STATIC ELECTRICAL CHARACTERISTICS
Table 3. Static Electrical Characteristics
Characteristics noted under conditions of 3.0 V ≤ VDD ≤ 5.5 V, 6.0 V ≤ VPWR ≤ 32 V, -40°C ≤ TC ≤ 125°C, and calibrated
timers, unless otherwise noted. Where typical values reflect the parameter’s approx. average value with VPWR = 13 V, TA =
25°C.
Characteristic
Symbol
Min
Typ
Max
Unit
POWER INPUT (VDD, VPWR)
Supply Voltage⁽⁴⁾
Fully Operational
Full Parameter Specification
Supply Current
All Outputs Disabled (Normal Mode)
Sleep State Supply Current (Must have V_DD ≤ 0.8 V for sleep state),
V_PWR = 32 V
V_PWR Over-voltage Shutdown Threshold Voltage⁽⁵⁾
V_PWR Over-voltage Shutdown Hysteresis Voltage
V_PWR Under-voltage Shutdown Threshold Voltage⁽⁶⁾
V_PWR Under-voltage Shutdown Hysteresis Voltage
V_PWR Low Operating Voltage (Low-voltage reported via the SPI)⁽⁷⁾
VDD Supply Voltage
VDD Supply Current
Static Condition and does not include VDD current out of device
VDD Supply Under-voltage (Sleep State) Threshold Voltage⁽⁸⁾
INJECTOR DRIVER OUTPUTS (OUT 0:3)
Drain-to-Source ON Resistance
I_OUT = 1.0 A, T_J = 125°C, VPWR = 13 V
I_OUT = 1.0 A, T_J = 25°C, VPWR = 13 V
I_OUT = 1.0 A, T_J = -40°C, VPWR = 13 V
Output Self Limiting Current
Output Fault Detection Voltage Threshold⁽⁹⁾
Outputs Programmed OFF (Open Load)
Outputs Programmed ON (Short to Battery)
Output OFF Open Load Detection Current
V_DRAIN = 18 V, Outputs Programmed OFF
V_DRAIN = 32 V, Outputs Programmed OFF (-40°C)
Output ON Open Load Detection Current
Current less then specification value considered open
V_{PWR (FO)}
4.5
–
36
V
6.0
32
I_{VPWR (ON)}
mA
–
10.0
14.0
I_{VPWR (SS)}
μA
–
15
30
V_PWR(OV)
36.5
39
42
V
V_PWR(OV-HYS)
0.5
1.5
3.0
V
V_PWR(UV)
3.0
4.0
4.4
V
V_PWR(UV-HYS)
100
200
300
mV
V_PWR(LOV)
5.3
–
8.99
V
V_DD
3.0
–
5.5
V
I_VDD
mA
–
–
1.0
V_DD(UV)
0.8
2.5
2.8
V
R_{DS (ON)}
Ω
–
–
0.3
–
0.2
–
–
–
–
I_{OUT (LIM)}
3.0
–
6.0
A
V_OUT(FLT-TH)
2.0
2.5
3.0
V
I_(OFF)OCO
μA
40
75
115
115
I_(ON)OCO
mA
20
100
200
33810
6
Analog Integrated Circuit Device Data
Freescale Semiconductor