MC9RS08KA8 Datasheet, PDF (5/40 Pages) Freescale Semiconductor, Inc – MCU Block Diagram

Electrical Characteristics
PTA5/TCLK/RESET/V_PP
1
PTA4/ACMPO/BKGD/MS
2
V_DD
3
V_SS
4
PTB7/SCL/EXTAL
5
PTB6/SDA/XTAL
6
PTB5/TPMCH1
7
PTB4/TPMCH0
8
16
PTA0/KBIP0/TPMCH0/ADP0/ACMP+
15
PTA1/KBIP1/TPMCH1/ADP1/ACMP–
14
PTA2/KBIP2/SDA/ADP2
13 ^{PTA3/KBIP3/SCL/ADP3}
12
PTB0/KBIP4/ADP4
11 ^{PTB1/KBIP5/ADP5}
10
PTB2/KBIP6/ADP6
9 ^{PTB3/KBIP7/ADP7}
Figure 3. MC9RS08KA8 Series in 16-Pin PDIP/SOIC Package
3 Electrical Characteristics
3.1 Introduction
This chapter contains electrical and timing specifications for the MC9RS08KA8 series of microcontrollers available at the time
of publication.
3.2 Parameter Classification
The electrical parameters shown in this supplement are guaranteed by various methods. To give the customer a better
understanding the following classification is used and the parameters are tagged accordingly in the tables where appropriate:
Table 2. Parameter Classifications
P Those parameters are guaranteed during production testing on each individual device.
C
Those parameters are achieved by the design characterization by measuring a statistically relevant
sample size across process variations.
Those parameters are achieved by design characterization on a small sample size from typical devices
T under typical conditions unless otherwise noted. All values shown in the typical column are within this
category.
D Those parameters are derived mainly from simulations.
NOTE
The classification is shown in the column labeled “C” in the parameter
tables where appropriate.
3.3 Absolute Maximum Ratings
Absolute maximum ratings are stress ratings only, and functional operation at the maxima is not guaranteed. Stress beyond the
limits specified in Table 3 may affect device reliability or cause permanent damage to the device. For functional operating
conditions, refer to the remaining tables in this chapter.
MC9RS08KA8 Series, Rev. 1
Freescale Semiconductor
Preliminary—Subject to Change Without Notice
5