S9S08SG8E2MSC Datasheet, PDF (287/320 Pages) Freescale Semiconductor, Inc – MC9S08SG8 MC9S08SG4 Data Sheet Addendum

Appendix A
Electrical Characteristics
A.1 Introduction
This section contains electrical and timing specifications for the MC9S08SG8 Series of microcontrollers
available at the time of publication.
The MC9S08SG8 Series includes both:
• Standard (STD) – devices that are standard-temperature rated.
• AEC Grade 0 – devices that are high-temperature rated.
A.2 Parameter Classification
The electrical parameters shown in this supplement are guaranteed by various methods. To give the
customer a better understanding the following classification is used and the parameters are tagged
accordingly in the tables where appropriate:
Table A-1. Parameter Classifications
P Those parameters are guaranteed during production testing on each individual device.
C
Those parameters are achieved by the design characterization by measuring a statistically relevant
sample size across process variations.
Those parameters are achieved by design characterization on a small sample size from typical devices
T under typical conditions unless otherwise noted. All values shown in the typical column are within this
category.
D Those parameters are derived mainly from simulations.
NOTE
The classification is shown in the column labeled “C” in the parameter
tables where appropriate.
A.3 Absolute Maximum Ratings
Absolute maximum ratings are stress ratings only, and functional operation at the maxima is not
guaranteed. Stress beyond the limits specified in Table A-2 may affect device reliability or cause
permanent damage to the device. For functional operating conditions, refer to the remaining tables in this
section.
MC9S08SG8 MCU Series Data Sheet, Rev. 7
Freescale Semiconductor
283